wu1chef
11-21-2008, 10:48 AM
If you order the CNC upgrade parts for your blade 400, note that you cannot use the stock wooden blades- it is too thick. You will need to upgrade to the carbon fiber 325 blades.
Also, the CNC main shaft is a bit long but works.
From what ive been told you still use the regular blade 400 main shaft, but for the tail shaft and spindle its the same as the trex450
Also, the CNC main shaft is a bit long but works.
From what ive been told you still use the regular blade 400 main shaft, but for the tail shaft and spindle its the same as the trex450